How To Videos
Click the modules below to learn more.
DYVO SIMULATOR
Want some practice using DYVO? Try out our free simulator.
Works on desktop computers. Not compatible with mobile devices.
In this video, learn how DYVO reads and displays voltage compared to traditional meters (DMM / multimeter).
Learn how to use DYVO to test the charging system (alternator/generator) on a 2011 Dodge Avenger 2.4L. We go in-depth on this one, covering how the charging system operates and how to test the circuits. This is a common system that Dodge/Jeep/Chrysler has used for many years. These alternators are regulated by the PCM through pulse width modulation (PWM).
In this video, we'll show you how to use DYVO to test the resistance of a fuel injector. You can use this same method to test the resistance of almost any component. DYVO applies more power through components than a traditional multimeter in Ohms, providing more accurate results and a better indication of the component's health.
We perform 37 tests in 5 minutes using DYVO. Perfect for both new and experienced technicians, DYVO can test the basics from headlights to advanced circuits such as CAN and control module sensors.
DYVO is the best meter for the best techs. Designed exclusively for 12V automotive circuits, find shorts, opens, and high resistance in seconds. Simple to use. Bright colored LEDs show you when a circuit is good or bad. Test multiple circuits at the same time. Diagnose with confidence. DIAGNOSE FASTER.
Learn how to test resistance using DYVO. It's fast and easy. DYVO gives you a better understanding of electrical problems compared to a traditional multimeter.
Follow along as we use DYVO to test a crankshaft position sensor (CKP) on a 2013 Dodge Dart 1.4 liter. Learn how to quickly test a 5V reference, ground, signal circuit, and control module. Use DYVO as a known good sensor to safely pull a circuit down.
In this video, we test an RV (1999 Ford Econoline) where the house battery isn't charging. Learn to test a battery isolator solenoid using DYVO. Understand the limitations of traditional battery solenoids and why it is better to use an automatic charging relay or latching solenoid (switch) such as the Blue Sea Systems m-ACR 7601. Also applicable to starter solenoids and continuous duty solenoids.
Learn the fast way to test a headlight and know if it only needs the bulb or if there is an electrical problem using DYVO. Easy to use and more accurate than a standard multimeter or DMM.
Learn how to quickly test fuses in a car and determine if the fuse is good or open (blown). DYVO is the best meter to test fuses. It combines a test light, voltmeter, and ohmmeter all in one!
Learn how to quickly and easily test a fuel pump using DYVO. This video focuses on the electrical tests of a fuel pump and circuits. Test for power and ground, as well as fuel pump resistance. Not sure if you have a bad fuel pump that needs replacement or an electrical problem? Test it first and diagnose with confidence using DYVO.
Learn to use DYVO to test a cam actuator solenoid. This is used in variable valve timing (VVT) systems. We'll cover testing the circuits to a cam actuator solenoid, testing the integrity (resistance) of the solenoid, and pulse width modulation (PWM) control.
Use DYVO to test the sensor, all the circuits, and pull a circuit down to verify the control module is good.
Using DYVO to test a rocker switch. Specifically, single pole double throw (SPDT). This switch has one input and two outputs. These switches were brand new out of the bag. Watch how to use loaded voltage drop testing to find out if the switch is good or bad.
Want some practice using DYVO? Try out our free simulator.
Works on desktop computers. Not compatible with mobile devices.