DYVO SOLO 2.0
$449

Looking to upgrade from Version 1.0? The Solo is your match. All previous test leads and accessories are compatible with DYVO 2.0. The Solo is perfect for those that already have all the test leads they need and only want the DYVO 2.0 Meter.

*DYVO is powered by the vehicle’s battery and requires a cable to connect. You can use any 4mm banana connector cables, but we highly recommend the Monster Lead Kit. This reaches 22 feet (6.7 meters), has a standard ATO/ATC fuse, and comes with large battery clamps.

DUE TO HIGH DEMAND, THIS ITEM IS ON BACKORDER.
SHIPS OCTOBER 10

Includes

✅ DYVO Meter 2.0

✅ Case - EVA “Ballistic Nylon” - Miller Approved

DYVO Solo P1030145.JPG
DYVO Solo P1030134.JPG
DYVO Solo P1030140.JPG
DYVO Solo P1030127.JPG
DYVO Solo P1030125.JPG
DYVO Solo P1030137.JPG
DYVO Solo P1030132.JPG
DYVO Solo P1030126.JPG

  • The fastest, easiest way to diagnose electrical circuits. Automatically loads and stresses circuits for accurate results. Computer safe.

    Use to easily find: shorts, opens, resistance, poor connections, wiring issues and defective components.

    For the professional technician, big bright display with voltage drop readings.

    For the entry level technician, green and red color indicators for good and bad results.

  • DYVO Meter 2.0

    EVA “Ballistic Nylon” case – Miller Approved

  • Operating voltage: (battery side) 7.50vDC – 17.99vDC
    External battery or power supply required. DYVO does not use an internal battery.

    Max battery voltage: 18.00vDC

    Input current: DC only

    Circuit input voltage: 0.00vDC – 17.99vDC
    ESD, voltage spike, and transient voltage safe up to +/-500v peak at less than 5us

    Current draw:
    ▣ Meter only, no circuit connections: 130mA @ 12.60v
    ▣ Maximum current draw (meter and both circuit channels): 570mA @ 17.99v

    LOAD Mode™ current draw:
    ~168mA @ 12.60v per circuit channel
    ~187mA @ 14.00v per circuit channel
    ~240mA @ 17.99v per circuit channel
    ▣ Impedance: 75 Ohms per circuit channel

    Computer safe mode (LOAD OFF) current draw:
    ▣ 0.000001A per circuit channel
    ▣ Impedance: 10M Ohms per circuit channel

    Battery alert levels:
    LOW: <12.00v
    OK: 12.00v – 15.09v
    HIGH: >15.09v

    + Channel thresholds:
    Green LED: 0.00v – 0.19v
    Yellow LED: 0.20v – 0.99v
    Red LED: 1.00v or greater

    - Channel thresholds:
    Green LED: 0.00v – 0.10v
    Yellow LED: 0.11v – 0.79v
    Red LED: 0.80v or greater

    Max time in LOAD Mode™: 2.5 minutes per 5 minutes of use

    Operating temperature: 32°F – 90°F (0°C – 32°C)

    Water contact: splash resistant

    LCD:
    ▣ Brightness: 800 nits
    ▣ Refresh rate: 333mS
    ▣ Size: 3.5″ x 2.0″
    ▣ Resolution: 0.01v

    Display cover: Gorilla Glass 1.1mm

    Capture rate:
    (minimum time signal must be at to detect voltage)
    ▣ 45us for repetitive changing signals (PWM & Duty Cycled)
    ▣ 400us for intermittent drop-outs & glitches

    Resolution: 12 Bit

    Accuracy: +/- 0.04v

    Connection type: standard 4mm banana connectors, accepts insulated (shrouded) and uninsulated types

    Measurement type and display units: Volts

  • LOAD Mode™ automatically applies an electrical load to circuits, forcing current to flow, providing the most accurate readings.

    3 Channels display battery voltage and two input channels.

    Numeric values display voltage values to two decimal places.

    LED colors provide guidance in voltage drop readings.

    MIN/MAX mode captures the minimum and maximum values for all channels.

    Menu allows user to modify settings and save preferred defaults.

    Cool Down Mode™ assists the user while testing in LOAD Mode.